Can I use paneling instead of drywall

Pros: Plastic paneling is very easy to install, making it an easy drywall alternative to recommend. You can simply screw most plastic paneling into place and you will be able to cover up walls directly. You can put them right over the studs, so it’s really convenient overall.

Is it cheaper to use drywall or paneling?

Because of the greater attention needed for cutting and trimming wood, paneling may take more time and cost more than installing drywall. Also, paneling doesn’t work as a sound barrier the way drywall does. Thus, in a workshop, installing wood paneling can produce a noisy, even irritating, atmosphere.

Can you panel without drywall?

Yes, You Can do It as long as the screws are long enough to Tap into the underlying studs of the Wall. However, it’s not because You Can Do It that You should do it. Leaving the Gypsum there may Give You additional mass and It Can Help Block out Sound. However, Sound Board Panels probably would do a Better Job.

What can you use for walls instead of drywall?

  • Wood Planks. Wood planks are an age-old drywall alternative that has certainly stood the test of time well. …
  • Veneer Plaster. …
  • Lath & Plaster. …
  • Plywood and Sheet Wood. …
  • Texture Wall Panels. …
  • Brick & Masonry. …
  • Exposed Concrete Block. …
  • Cement Board.

Can you put paneling directly on studs?

Panels 1/4″ and thicker can be installed directly over even framing members–studs or furring strips (check building codes for your area). All paneling may be put up with nails or with a combination of panel adhesive and nails.

Can Plywood be used instead of drywall?

Plywood is a viable alternative to drywall for walls and ceilings. If you are planning on redoing your walls or ceilings, the typical materials you’ll use include Sheetrock or finished plywood. Each has its benefits as a building material and in some cases, finished plywood is the better alternative.

Can you do wall Panelling yourself?

Now it’s time to cut the panels, which is dependent on the size of your wall, or how much you want to panel. You can either cut the panels yourself or ask a professional.

What can I use for basement walls instead of drywall?

If installing drywall panels, use moisture- and mildew-resistant drywall. When insulating concrete basement walls (a good idea because concrete basement walls are often cold), use rigid foam board insulation if the insulation will come into direct contact with the concrete wall.

How do you smooth walls without plastering?

  1. Fill Holes or Cracks. Before you do anything, fill any holes and cracks in your wall. …
  2. Sanding. If your old plaster is a bit lumpy and bumpy, sand it to smooth out any bumps. …
  3. Clean the Wall of Scuffs & Marks. …
  4. Hang Wallpaper. …
  5. Paint Your Walls.
Can you put paneling over unfinished drywall?

Installing paneling over existing drywall is a fairly straightforward process. As with most building projects, proper planning and preparation will make it easier for you to get professional looking results.

Article first time published on

Does wood paneling have drywall behind it?

Confirm that there is drywall under the wood paneling. Although you might think there is drywall beneath your wood paneling, you will need to make sure. Carefully remove a piece of molding or trim, or a light switch cover. One of these options will usually allow you to see what is behind the paneling.

Is paneling coming back?

Bringing the natural world indoors, wood paneling is making a comeback. … In the ’60s and ’70s, wood paneling, often made in plywood-sized sheets, was popular in home decor. But like avocado-colored refrigerators, the look didn’t last. Now refreshed, wood paneling is returning to designers’ playbooks.

Can I use beadboard instead of drywall?

Cost Considerations Drywall is heavy and will take at least two workers to install, doubling the cost of installation alone, while tongue-and-groove beadboard is more time-intensive and requires additional framing members. Beadboard panels are perhaps the easiest to install and the friendliest option to modest budgets.

Will Brad nails hold paneling?

Brads have smaller, and thus less conspicuous, heads than nails. They are therefore well-suited to craft projects and for use in projects where the surface cannot be finished further, such as wall paneling.

Do you have to glue paneling?

Decorative paneling and tile boards can accent a space in your home, and can easily be installed with a construction adhesive. To get the job done, we recommend using LIQUID NAILS® Heavy Duty Construction Adhesive (LN-903).

Does wall Panelling make a room look bigger?

Exaggerate vertical space with vertical panels Whether you have a high ceiling in your space or not, you can make a small bedroom look bigger by exaggerating the room’s ceiling height with vertical panels or stripes. This is overt in this room – but even a vertically striped wallpaper will do the trick.

What is the cheapest way to cover a wall?

  1. Foam board.
  2. Large art prints.
  3. Starched fabric wall covering.
  4. Loose fabric wall covering/curtain.
  5. Tapestry wall hanging.
  6. Vinyl wall decals.
  7. Peel and stick wallpaper.
  8. Mirrors.

How do you use plywood instead of drywall?

Using plywood to cover walls eliminates the need to track down studs. Instead, simply screw objects directly to the plywood, which offers the structural strength to support more weight than the average drywall surface.

Is wood paneling a fire hazard?

Since then, the most serious problem that has always accompanied the use of wood walls, wood panelling and wood ceilings is the risk of fire. … Of course, all wood panels used for the construction of wood ceilings and walls, and interior finishes, must have appropriate systems to react and perform when exposed to fire.

Can you staple paneling?

Lots of panels can be completely installed without finish nails, glue or screws, with the help of clips that are attached to the wall. With a staple gun, it’s easy to attach the clips to most undersurfaces, even when the wall leans or is irregular. …

What can I use instead of plastering walls?

  1. Wood Planks. Wood planks will be a fantastic option to consider for anyone who would like to achieve a rustic look. …
  2. Plastic Panels. …
  3. Plywood. …
  4. Veneer Plaster. …
  5. Pegboard. …
  6. Lath and Plaster. …
  7. Wahoo Walls. …
  8. Textured Wall Panels.

How do you cover rough interior walls?

  1. Drywall Joint Compound. Drywall joint compound is often the best way to cover rough texture and leave a flat, blank canvas on your wall. …
  2. Wallpaper With Liner. …
  3. Paneling. …
  4. Fabric.

What's the difference between plastering and skimming?

They are both used to decorate structures and increase the durability of a wall, but skimming is done to update an old building whereas plastering is done to a new one. Another difference between skim and plaster is that plaster surface areas are constantly rough whereas a skimmed surface area is smooth.

Can you use wall paneling for ceiling?

Paneling. … Depending on the look you’re after, paneling over an ugly ceiling is still a viable option. Be sure to take into account the weight of the paneling. You’ll need solid framework to attach the paneling to.

How can I cover my basement walls cheaply?

Fortunately, you can cover basement foundation walls quickly and inexpensively. Attach wood furring strips, Z-shape channels, or 2×4 studs to flat, dry masonry walls, then add insulation and cover the strips or studs with drywall.

Can you finish basement walls without drywall?

The alternatives besides drywall or studs that can be used to finish your basement wall are wood planks, plastic panels, veneer plaster, wahoo walls, plywood, and pegboards. These options are easy to set up and maintain compared to drywall or studs that have problems with moisture and dust.

How do you install beadboard paneling on drywall?

  1. Remove and replace sheetrock as needed.
  2. Mark the studs with painter’s tape and a marker.
  3. Make a template.
  4. Cut out template with a jig saw.
  5. Glue to sub-surface with Liquid Nails adhesive and then nail.
  6. Caulk where necessary and paint.

Do I need drywall under shiplap?

If you are remodeling your home or building new, you may consider installing shiplap in place of drywall in select areas to lower your overall cost. If don’t already have drywall installed, you do not need it as a base for affixing shiplap.

Should I paint paneling or remove it?

Wood paneling can make a home feel warm and comfortable. However, if your house is full of paneling that is dated, damaged, or made of an inferior veneer, it’s worth considering an upgrade. Since removing it could be costly, consider a coat of paint.

Can you take wood paneling off walls?

The task of removing the wood paneling itself is not difficult. Remove any pieces of molding or trim along the floor, ceiling and corners of the room. Use a pry bar to remove each piece of paneling, lifting the pieces away from the drywall or wall studs and removing them in complete sections wherever possible.

When did paneling go out of style?

Wood paneling was all the rage in the mid-20th century, before falling out of favor for decades. If you wanted an updated home, the first thing to go was the wood paneling on the walls. Bright, sleek colors were used to replace what was seen as dated wood textures.