Can you stain cedar decking

A: Need some wood staining advice? Cedar wood makes for a beautiful deck surface, but it won’t stay that way if it isn’t protected. … Finishing off your newly-installed cedar deck with a sealant or wood stain will help to prolong the life, beauty, and appeal of the deck for years to come.

Should you stain a cedar deck?

If properly maintained, the wood can last decades. As a contractor and decking specialist, I’ve seen some cedar decking last more than 50 years. But the key to that longevity is maintenance. You need to stain it every one to three years to keep it looking its best.

Should you finish a cedar deck?

Your deck needs to be professionally done if you want expert results. … Every two years a deck should be redone, cleaned and sealed. A new cedar deck will not hold as much oil based sealer in that natural oils are still present.

Should I paint or stain my cedar deck?

Better, Lasting Coverage While staining may take less time than painting, painting often does a better job of filling the cracks, covering imperfections, and provides longer lasting protection. Paint also is typically more rot resistance and does a better job of preventing mold and sun damage.

What stain looks good on cedar?

  • Ready Seal Natural Cedar Exterior Stain.
  • Thompson’s WaterSeal Waterproofing Stain.
  • Defy Extreme Transparent Exterior Wood Stain.
  • Olympic Stain Elite Woodland Oil Stain.
  • Cabot Semi-Solid Deck & Siding Stain.

Does cedar decking need to be sealed?

Sealing your deck will keep it safe from water damage, rot, and insects. Stain, on the other hand, enhances the deck’s beauty while offering UV protection. Every two to three years, you will want to reseal and stain your cedar deck.

When should you not stain a deck?

Apply stain when the temps are between 50 and 90 degrees, and avoid staining in direct sunlight if possible. Sun dries out stain quickly and can create uneven color or brush marks. Check the weather forecast to make sure you have several dry days ahead.

Should you pressure wash deck before staining?

There is a common misconception that just pressure washing a deck prior to staining is all you need to do in order to prep your deck for stain. Pressure washing can help, but if you want your stain to last, using a good deck cleaner and brightener on the deck prior to pressure washing will provide you the best result.

Do I need to strip my deck before staining?

Staining a previously stained deck If there are flakes of your stain on the tape, then you will need to strip your deck before restaining.

Do I need to seal my deck after staining?

Most of the time, stains also contain a protective sealant. It’s a good idea, though, to re-seal your deck (or check that it needs to be re-sealed) once a year. Water-based stains can adhere to water or oil-based coatings already present on the wooden surface.

Article first time published on askingthelot.com/can-you-stain-cedar-decking/

How much does it cost to stain a deck?

The cost to stain your deck typically ranges from $540 to $1,050 with an average of just over $700. This equates to an average cost of $2 to $4 per square foot for labor and materials. Higher-quality stains will run up the price, as will washing or sealing the wood prior to staining.

Can you stain a deck in the sun?

Extreme heat or sun can work against you when you are staining your deck. The direct sunlight can cause the deck to dry too quickly which will leave water marks. If the weather is forecasting for no rain, and you can expect the temperatures to be below 80 or 85 degrees Fahrenheit, make a plan to stain your deck.

Should you stain or seal cedar?

Cedar offers a durable option for exterior and interior building projects with natural resistance to rot and decay, so a protective finish is optional. … If you’re using cedar for an outdoor project, give it a light seal coat to guard against moisture and sunlight.

Should you sand cedar before staining?

If your cedar deck is newly installed, you’ll need to sand* the cedar boards prior to staining. … The planing process causes an oily surface on the boards that can hinder the wood stain from penetrating the wood. For an existing deck, you may need to sand* to remove loose wood fibers.

Can you leave cedar untreated?

If you leave cedar wood untreated, it will not succumb to the devastating effects of mold, rot and insect damage. However, it will lose its typically golden-brown color. … However, even with the proper maintenance, cedar will eventually succumb to fading—usually after about 10 years—and lose its natural tone for good.

How do you finish a cedar deck?

  1. Never power wash cedar decking. While it can be tempting to get every last piece of dirt off of the boards, never power wash your cedar decking. …
  2. Pick the right kind of stain. …
  3. Stain prior to construction. …
  4. Reapply the finish regularly.

How do you stain exterior cedar?

  1. Prepare the surface: Using an exterior wood cleaner and a scrub brush, give the surface a thorough cleaning. …
  2. Apply the stain: Using a roller and brushes, apply the stain to the entire surface. …
  3. Keep a wet edge: As with any stain or paint project, be sure to maintain a wet edge to avoid lap marks or dry spots.

Can you paint a cedar deck?

Although cedar decks look beautiful when they are new, they will turn a dull gray relatively soon unless they are sealed with a coat of stain or paint. … Do not paint over an unprimed cedar deck. First, you must prepare the surface to accept paint, or over time the painted finish coat will flake and peel.

What is the best time of year to stain a deck?

The best time to stain your deck is either the spring or the fall. If you stain your deck in the summer, make sure you do it out of the direct sunlight. Applying a deck stain in direct sun will cause the stain to dry to quickly and can result in premature stain failure.

How many coats of stain should you put on a deck?

The general rule of thumb is to apply only as much deck stain as the wood can absorb. Typically this will be 2 coats, unless your dealing with extremely dense hardwoods which may only be able to absorb 1 coat of wood stain.

Is it worth staining a deck?

Staining a deck will lead to less work in the future. One of the main reasons the professionals don’t recommend staining wood decks is because of the amount of time and energy involved. Stains don’t generally last more than a year. This means yearly cleaning, staining and, if necessary, sanding of your deck every year.

Is it OK to pressure wash a cedar deck?

For cleaning a wooden deck, you’ll be best served by using the lowest pressure setting that’s still effective. For soft woods like cedar or pine, this is usually about 500 to 600 psi. For harder woods, it can go up to 1200 to 1500 psi. … Never get closer than 12 inches from the deck unless you’re using low pressure.

Can cedar wood be stained?

Staining the cedar is the absolute best way to ensure this, especially in areas that have four-season climates. Since Western Red Cedar naturally lacks pitch and resin, it allows for countless staining options and will accept stain very well if applied correctly.

How long will cedar decking last?

Most carpenters figure a lifespan of 15 to 20 years for cedar wood deck boards, but it can deteriorate faster when used for ground-level decks and for shaded decks that are slow to dry out. To retain the color, you have to clean it and reseal it every year or two, and even then it’s a losing battle.

Why is my decking stain peeling?

Deck stains will generally peel for two basic reasons: over application and poor adhesion. This is simple — too much stain on the surface of the wood. With deck stains, specifically with semi-transparent finishes, more is not better. You only want to apply as much product as the wood can easily absorb.

Should I sand my deck before staining?

Once dry, these wood fibers can remain raised and may cause splinters. For this reason, light but thoroughly sanding your wood deck is a necessary step before staining or sealing. This crucial step will ensure that your refinishing job gives great results.

Can I change the Colour of my decking?

Remove any existing deck stain color using a paint stripper or sander. Make sure the paint or stain is uniformly removed from the wood surface and no patches remain. This will help your new stain look the same across every part of the deck. Once all of the color is removed, you can proceed to cleaning the deck.

How long after pressure washing Can I stain my deck?

After a deck has been power washed it will have some retained moisture within the wood. It’s important to let the wood dry thoroughly so none of the water that soaked into the wood gets trapped under the stain. In perfect drying conditions, 48 hours is enough for the wood to get to where it needs to be before staining.

Do you sand or clean deck first?

You need to clean the deck after sanding to remove all the dust and open up the pores in the wood that get clogged when sanding.

What temperature can you stain a deck?

Apply stain only at the proper temperature. For most stains, 70 degrees Fahrenheit is the optimum, with the safety range from 50 to 90 degrees Fahrenheit. Stains do vary, so check the label first. Avoid high humidity and staining on hot surfaces.

What is the longest lasting deck stain?

  • Solid. Just like regular paint, solid stains hide the grain of wood, and the best should last three to five years on a deck, the longest of the three types of stains. …
  • Semi-transparent. …
  • Clear sealer.