How do you prune Tor spirea

Prune out older branches to promote new growth and more blossoms. Plant Care: These shrubs look best on one year of new growth. Cut down all branches to the base of the plant every year in the late winter or early spring.

When should spirea be cut back?

More drastically cutting back spirea should occur in the fall or in late winter to early spring. Remove any dead branches and use this trimming to shape the shrub. Cutting it way back will stimulate new growth in tighter clusters so that you can get a more rounded, compact shrub shape.

How big do TOR spirea get?

‘Tor’ typically grows 2-3′ tall in a dense, compact, rounded mound. Tiny white flowers in small flattened clusters (corymbs) cover the foliage in late spring. Birch-like, dark green leaves (to 1.5” long) are oval and sharpely toothed.

How far back can you prune spirea?

Trim back overgrown spireas or those that produced sparse foliage on the lower stems severely in fall after the foliage begins to fall off, to keep the shrubs shaped and compact. Cut back each stem to within 8 to 12 inches of the ground.

Will spirea rebloom if deadheaded?

Cutting three to six inches off the stems of pink-flowering spireas will improve the appearance of the shrubs and promote new growth. If your spireas didn’t get cut back in the spring you can take as much as six to eight inches off now. When deadheaded in early July the plants will flower again.

Can you cut back spirea in the summer?

Throughout the summer, the plants shape can be maintained by cutting back overgrown spirea shoots or stems as well as any dead or diseased branches. Try to make the cuts within ¼ inch (6 mm.) … To keep spirea looking great and to promote blooming, trim the plant at least twice per year.

Can I cut spirea to the ground?

The spirea species (Spiraea spp.) … To control the spirea’s size and keep it blooming year after year, you should prune it back after blooming or when it’s dormant in winter. If it’s severely overgrown, cut it to the ground to rejuvenate the shrub.

How do you look after Spirea japonica?

Plant spiraea when dormant, in garden borders. Mulch and feed annually and prune, if necessary, after flowering. Mature overgrown spiraeas can be rejuvenated by selective renovation pruning. Propagate spiraeas by cuttings in mid to late summer.

How do you take care of a spirea bush?

Keep newly planted spireas well-watered until they become established. Mature spireas are drought tolerant and only need watering when the soil becomes dry. Spireas don’t like wet feet, so avoid oversaturating the soil.

How do you prune a spirea bridal wreath?

Spiraea ‘Arguta’ Bridal wreath is smothered with white blossom in spring. After it has flowered, take the chance to prune it and encourage bushy growth. Cut the flowered stems back to a sideshoot. Mature plants with congested branches can be thinned by removing one third of the oldest stems.

Article first time published on

How do you keep spirea from spreading?

In areas where the population of spirea is sparse or in areas that are environmentally susceptible, one way to stop the spread of Japanese spirea is to cut or mow the plant. Repeated mowing of the invasive plant will slow its spread but not eradicate it.

How do you propagate spirea bushes?

Dig holes in the ground about 4 to 6 inches deep. Place cuttings in the hole, angled end up, then fill in the hole with soil and firm in place. Water well and keep soil moist. After cuttings show healthy new growth in spring they can be planted into pots or a permanent location.

Can you split a spirea bush?

Method. A spirea bush can be split in two ways. The first method, commonly used for many perennials, is to dig up the entire plant, split the root ball down the middle and replant both sections as individual plants. … Lift it out and away from the larger plant to complete the division.

How many times does spirea bloom?

Native to:Temperate regions of the Northern HemisphereHardiness (USDA Zone):4-8, with some more heat and cold tolerantBloom Time:Spring blooming varieties flower May-June, summer blooming varieties July-SeptemberExposure:Full sunSpacing:2-15 feet, depending on variety

Can barberry bushes be cut back?

If you are keeping your barberry shrubs as a hedge, it is necessary to prune them a couple of times a year. Pruning barberry plants increase shrub health and vigor. Prune for shape during the winter or fall after the plant has fruited. Remove dead wood during the summer and winter months.

Do spirea have deep roots?

The depth of the roots really depends on the height. For example, an old fashioned bridal wreath spirea that is 10′ x 20′ will have roots about 30” deep. A smaller maturing one, Sundrop, will have roots close to 12-18” deep.

When can I trim my burning bush?

Pruning. You should prune your burning bush shrub in late winter or early spring, either to maintain its shape or to boost new growth. Always be sure to remove any dead, damaged, or diseased wood close to the main branch to encourage the emergence of a healthy bud.

Can spirea take full sun?

Spireas (Spiraea species) are among the easiest flowering shrubs to grow. These attractive shrubs are fast growing and should be grown in full sun for best flowering. They can, however, tolerate partial shade. Some are spring bloomers; whereas others bloom in the summer.

How do you fertilize spirea?

Spireas are not heavy feeders, so, after they have been in place for a season, start to fertilize them once every year in the fall after their leaves fall or early spring, which is better in the South. Sprinkle some all-purpose slow-acting granular fertilizer on the soil over their roots for the rain to soak in.

Why are my spirea dying?

Too much or too little water can stress plants. Although spirea tolerates dry sites, it grows best in consistently moist soil that drains well. … Too much water can cause leaves to turn yellow or entire stems to die, which may give you a false signal your plant needs more water.

Is Magic Carpet Spirea Evergreen?

Bursting out in color, Spiraea japonica Magic Carpet ‘Walbuma’ (Japanese Spirea) is a low-growing deciduous shrub with brilliant red leaves in spring, maturing to golden yellow as the summer progresses.

Is spirea poisonous to dogs?

Spiraea blooms in spring or in summer and it demonstrates the incredible adaptation to soil and climate. Forsythia is a shrub for spring color that is also among safe plants for pets. It features fabulous flowers and it’s a good garden border and bird habitat.

Why does my spirea have brown spots?

Discolored Blotches on Leaves Caused by Fungal Leaf Spot Heavily infected leaves turn yellow or brown and fall prematurely. Some fungal spots are surrounded by flecks or black dots, the spore-bearing fruiting bodies.

Is Spiraea japonica invasive?

Also known as Japanese Meadowsweet, this ornamental shrub was first introduced from Asia around 1870 to 1880 due to its showy flowers. It is now classified as invasive in the Mid-Atlantic states, including Virginia, and is on the list for Arlington County. …

How do you prune a bride's shrub?

For best results, grow Exochorda x macrantha ‘The Bride’ in full sun in moist, well-drained soil. It’s important that it is pruned right after flowering, to ensure a good show of flowers the following year. Do this by cutting back each flowering stem by half their length, after blooming has ended.

Can false spirea be pruned?

Prune these spring flowering shrubs soon after they have bloomed. Top prune the plant to improve the shape and reduce its size, but be careful not to remove more than 30% of the top growth. As the plant matures, some “renewal pruning” should be done. …

What plants go well with spirea?

They look especially good paired with bigleaf hydrangeas. Or set them near clumps of hostas that will take some sun. Since spirea blossoms are mainly flat clusters, contrast the flower shapes you plant nearby. Narrow purple spikes of salvia or upright plumes of astilbe add nice variety.

Can you start a spirea from a cutting?

A: Bridalwreath spirea is fairly easy to start from cuttings. They usually root from both softwood cuttings taken in early June or hardwood cuttings taken in late fall.

How fast does a spirea bush grow?

How big do spirea bushes get? Mature size ranges from 2-10 feet tall and wide. This fast grower can add up to 2 feet of new growth in a single season. Plants can be kept smaller with pruning.

Can spirea be propagated by cuttings?

Propagating spirea by rooting softwood cuttings is a simple and effective technique; however, the key is knowing when the shrub is at the softwood stage — usually between mid- and late summer. To determine readiness, bend a young stem. If the stem is flexible, bends easily and breaks with a snap, it’s ready.

What can I plant with goldflame spirea?

Botanical Pronunciationspy-REE-a x bew-MAL-daWater NeedsModerateWatering NeedsWater regularly to maintain evenly moist soil – weekly, or more often.Companion PlantsMaiden Grass (Miscanthus); Weigela (Weigela); Coneflower (Echinacea); Spruce (Picea); Barberry (Berberis)