How many OSHA inspectors are there

Federal OSHA is a small agency; with our state partners we have approximately 1,850 inspectors responsible for the health and safety of 130 million workers, employed at more than 8 million worksites around the nation — which translates to about one compliance officer for every 70,000 workers.

How many inspectors does OSHA have in their fleet?

But the number of federal OSHA inspectors fell to a low of 875 in 2019, compared to a high of 1,469 in 1980. The drop in inspectors coincided with an expansion of workplaces to protect, from 4.5 million in 1980 to more than 8.1 million today.

How many inspections did OSHA do in 2020?

In FY 2020, OSHA conducted 21,674 inspections, including 12,948 (about 60 percent) unprogrammed inspections, which includes employee complaints, injuries/fatalities, and referrals, all of which were impacted by the COVID-19 pandemic.

How many OSHA compliance officers are there?

Currently, federal OSHA employs approximately 770 field compliance officers.

How many inspections did OSHA conduct in 2019?

In FY 2019, OSHA conducted 33,393 inspections, including 18,493 (about 55 percent) unprogrammed inspections, which includes employee complaints, injuries/fatalities, and referrals.

What is OSHA's Fatal Four?

Construction Hazards The top four causes of construction fatalities are: Falls, Struck-By, Caught-In/Between and Electrocutions.

What is the #1 work related fall?

1. Slips, trips, and falls. Slips, trips, and falls are some of the most common types of workplace injuries and are the top reason for worker’s compensation claims.

How many road construction workers died in 2019?

The construction industry again had the highest number of fatalities of all industries in 2019 with 1,061 worker deaths. This is a 5.3% increase over the 1,008 fatal injuries in 2018. It’s the highest total since 2007 when the industry recorded 1,204 fatal work injuries.

How many lives has OSHA saved?

This December will be 50 years since Congress enacted the OSH Act, promising workers in this country the right to a safe job. More than 618,000 workers now can say their lives have been saved since the passage of the OSH Act. Since that time, workplace safety and health conditions have improved.

Which industry has the highest number of fatal injuries?
  • Agriculture, forestry, fishing and hunting.
  • Government. …
  • Retail trade. …
  • Leisure and hospitality. …
  • Other services (example, public admin) …
  • Educational and health services. …
  • Wholesale trade. …
  • Mining, quarrying, and oil and gas extraction. Number of fatal work injuries: 127. …
Article first time published on

How many construction workers died in 2019?

Yearly Construction Deaths In 2019, the United States saw 5,333 deaths from construction accidents alone. This is the highest fatality rate of any industry.

Is OSHA still relevant?

OSHA protects more than 130 million employees in the United States. Aside from safety, it increases employee productivity, keeps your employees at work, increases your overall profitability, and protects you from lawsuits or legal ramifications.

What is OSHA rate?

An OSHA Incident Rate is a measure of how often a recordable injury or illness occurs at your business over a specified period of time, typically one year.

What are the top 3 OSHA cited ladder violations?

TypeNumber of Violations1. Fall Protection (General)5,4242. Hazard Communication3,1993. Respiratory Protection2,6494. Scaffolding2,538

What are the 3 types of falls?

  • Physiological (anticipated). Most in-hospital falls belong to this category. …
  • Physiological (unanticipated). …
  • Accidental.

What are two groups of workers that OSHA does not apply to?

State and Local Government Workers — Workers at state and local government agencies are not covered by Federal OSHA, but have OSH Act protections if they work in one of the states or territories that have an OSHA-approved state program. Federal Government Workers — OSHA’s protection applies to all federal agencies.

What are the 4 leading causes of death in the construction industry?

The four leading causes of death in the construction industry, sometimes referred to as “The Fatal Four,” are falls, being caught in or between objects, electrocutions, and being struck by an object.

What does Jha stand for?

JHA stands for Job Hazard Analysis. … When done properly, the JHA will allow an employer to find hazards before they cause accidents, injuries, or damage to anything in the area.

What color means caution?

Yellow – warns of physical hazards and means caution. A striped or checkered pattern of yellow and black may be used to help attract attention. Blue – denotes caution and its use is restricted to marking out-of-service equipment which should not be used.

How do you avoid fatal 4?

  1. Wear and use personal fall arrest equipment.
  2. Install and maintain perimeter protection.
  3. Cover and secure floor openings and label floor opening covers.
  4. Use ladders and scaffolds safely.

How many people died a year before OSHA?

Looking at the 23-year period before OSHA, the average annual decline in fatalities was 139; but since OSHA, the decline has improved to 204.

How many injuries has OSHA prevented?

Standard on process safety management of highly hazardous chemicals adopted to reduce fire and explosion risks for 3 million workers at 25,000 workplaces, preventing more than 250 deaths and more than 1,500 injuries each year.

Who is the head of OSHA?

Doug Parker, the former head of Cal/OSHA, has been tapped as the next assistant secretary of labor at the U.S. Department of Labor. The U.S. Senate has confirmed Doug Parker to lead the Occupational Safety and Health Administration (OSHA).

What is the most common collision in a work zone?

Rear-end crashes (running into the rear of a slowing or stopping vehicle) are the most common type of work zone crash. Fatal work zone crashes occur most often in summer and fall. The majority of fatal work zone crashes occurred on roads with speed limits greater than 50 mph.

What is the number 1 cause of work related fatalities?

Overwhelmingly, motor vehicle accidents are the leading cause of workplace fatalities in the U.S. Car and truck crashes account for 40% of job-related deaths each year, according to the National Safety Council. Motor vehicle accidents are the #1 or #2 cause of job-related death across all industry groups.

How many flaggers are killed each year?

From 1982 through 2019, 28,636 individuals (about 774 per year) lost their lives in work zone crashes. Since the peak year of 2002 – when 1,186 died in construction and maintenance zones – the number of deaths declined steadily to an average of 591 from 2008-2014, then increased to an average of 782 from 2015-2019.

What occupation has the most deaths?

  • Fishing and hunting: 145 per 100,000.
  • Logging: 68.9 per 100,000.
  • Aircraft pilots and flight engineers: 61.8 per 100,000.
  • Roofers: 54 per 100,000.
  • Construction: 40 per 100,000.

What industry has most accidents?

IndustryRankTotal cases (per 100 workers)Couriers and messengers18.1Air transportation26.5Wood product manufacturing36.1Performing arts, spectator sports, and related industries46.0

How many workers died building the Empire State Building?

Empire State Building: 5 deaths 3,400 laborers working for $15 a day moved at lightening pace, building 4.5 floors a week until completion.

What accident kills most construction workers?

  1. Falls – Accountable for 35.5% of Construction Worker Deaths. …
  2. Struck By Object – Accountable for 11.1% of Construction Worker Deaths. …
  3. Electrocutions – Accountable for 8.5% of Construction Worker Deaths. …
  4. Caught In/Between – Accountable for 11.1% of Construction Worker Deaths.

Can OSHA shut down a business?

OSHA officials can order work to stop if they find a severe risk on-site, but contrary to popular belief, they don’t have the authority to shut down a business entirely. Only a court order can do that.