How much does it cost to get a pool resurfaced

The national average cost of resurfacing a pool is $6,500, and ranges from $1,000 to $100,000, including materials and labor. Labor charges vary from $45 to $65 an hour depending on the work involved and the location of the project.

How much does it cost to resurface a 10000 gallon pool?

Re-plastering the interior surface of an average residential in-ground pool (10,000-20,000 gallons or 14’x28′ to 16’x32′ and 3.5′-5′ deep) with standard white plaster or marble-dust plaster (marcite) typically costs $2,500-$5,500, depending on the size, depth and shape of the pool, and local rates.

How long should pool resurfacing last?

To determine how often your pool needs to be resurfaced will depend upon when it was installed and with what material it was made. Cement and plaster, for example, usually require resurfacing every three to seven years. Whereas more durable material can last as long as fifteen years before such a job is required.

How often does an inground pool need to be resurfaced?

How often is it necessary to resurface a pool? It varies depending on the type of pool, with plaster or cement pools needing to be resurfaced every 3-7 years while fiberglass pools can sometimes go as long as 15-30 years.

What is the average cost to Replaster a swimming pool?

The typical cost to have a pool replastered is between $4 and $7 per square foot. Assuming an average pool size of 16 feet by 32 feet, 4 feet deep on the shallow end and 8 feet on the deep end, that’s total of 1,088 square feet. If the cost is $5 per square foot, replastering would cost $5,440.

What happens if I dont resurface my pool?

If you don’t resurface the pool, which is necessary because it is always exposed to weather, cracks and an unevenness in the pool surface will occur and this could lead to algae stains, water leaking and injuries from the uneven surface.

How do you know when your pool needs to be resurfaced?

  1. Plaster Flaking or Peeling. Maybe you’ve noticed the plaster is peeling along the steps or floor of your pool or spa. …
  2. Surface Stains. …
  3. Roughness. …
  4. Check Cracks. …
  5. Plaster Discolorations. …
  6. Structural Cracks. …
  7. Rust Stains. …
  8. Loss of Pebbles.

What is Diamond Brite pool finish?

Diamond Brite® finishes are blends of selected quartz aggregates and fortified white Portland cement ideal for new or re-finished swimming pools. Diamond Brite® finishes are factory blended to provide the pool owner with an extremely durable and attractive alternative to traditional pool coatings.

Can fiberglass pools be recoated?

So, how do you resurface a fiberglass pool? Typically, you would use a product like ecoFINISH if you need to have your fiberglass pool resurfaced. ecoFINISH is a long-lasting, chemical-resistant coating that can be applied to a variety of concrete and fiberglass pool surfaces.

What is pool Marcite?

Marcite / traditional pool plaster Marcite is a mixture composed primarily of white Portland cement, marble dust, and fortifying additives to boost strength and water resistance. Mixed with water, it forms a smooth material that specialty crews use to coat the inside of a pool.

Article first time published on askingthelot.com/how-much-does-it-cost-to-get-a-pool-resurfaced/

How often does a concrete pool need to be resurfaced?

How often do you have to resurface a concrete pool? A concrete pool is a little bit different and typically only needs to be resurfaced every 10 to 15 years. Additionally, you’ll typically have to replace the waterline when you do so.

How soon after pool resurfacing Can you swim?

After the pool is full it usually takes up to 1 week before the pool is ready for you to swim. The shortest timeline we have seen for swimming after filling a plaster pool is 5 days.

Do I need to Replaster my pool?

When it comes to your pool, you should set aside a budget to replaster your pool. Ideally, you should white coat your pool once every ten years. In this time, you should have more than enough money to make fixes and give your pool some welcome updates. Usually, you would plaster your pool based on the look and feel.

How long does it take to resurface pool?

How long does it take to resurface a pool? Pool resurfacing usually takes about 5-7 days to complete. The pool resurfacing process can be hindered by weather, however, and may take up to 14 days in certain cases.

How much more expensive is Pebble Tec than plaster?

Thanks to its relatively simple look and material makeup, pool plaster is a lot less expensive than Pebble Tec®. White plaster costs about $4 for every square foot of pool surface. Meanwhile, a pebble finish, like Pebble Tec® or Pebble Sheen®, can easily cost $10 or more per square foot.

How many times can a pool be resurfaced?

Pool resurfacing or replastering should be done every 10 years. This is based on the surface lifespans of cement and pool plaster material. But constant use, chemical exposure, and climate changes can damage the pool plaster.

How does a pool get resurfaced?

There are five main steps in resurfacing a swimming pool: draining the pool, prepping the pool (which would include repairs and tile work, if any), bond kote, applying the interior finish, and filling the pool.

What happens when you resurface a pool?

Pool resurfacing is the process of removing the old pool surface (tiles, pebbles, plaster, etc.) and applying a new one. It can also include fixing any cracks, blisters, and other damages that may have appeared on the pool’s floor and walls over the years.

Is it possible to Replaster your own pool?

It will chip and wear away more easily, and when it does, you will need to repair it. If there’s a reason to use paint over plaster, it’s that the application process really is a lot easier. While you could paint on your own, replastering is something that only the most industrious homeowners take on.

How much does it cost to resurface a fiberglass pool?

Average Cost to Resurface a Pool Gunite and fiberglass can average up to $6,500, including labor. Depending on what you currently have, resurfacing may require completely replacing the pool surface and base. This costs between $35,000 and $65,000 and is essentially the same as the cost of building a new pool.

How much does it cost to repair a fiberglass pool?

Fiberglass pool repair costs $300 to $400 for a gel coat that restores dinged, scratched and cracked surfaces. Expect to pay up to $800 more to repaint after doing the repairs. You also have to cover the cost of draining the water, refilling the pool and applying the right chemicals.

How long does a resurfaced fiberglass pool last?

How often should my pool be resurfaced? Resurfacing a fibreglass pool is recommended every 15 to 30 years, however this can vary depending on the condition of your pool.

How much does it cost to Diamond Brite a pool?

Diamond Brite lasts eight to 12 years before it fades and gets spotty. We recommend acid washing this finish after about five years to keep it bright. Each style and color has a different price, but a Diamond Brite finish costs about $5,000 to $10,000.

What is the smoothest pool finish?

PebbleFina® – provides the smoothest finish with superior strength and long-lasting durability, made from PTI’s smallest pebble. Choose from 11 different color options. PebbleBrillinace® – combines vibrant glass beads and natural stone to deliver a captivating finish and a uniquely brilliant water color.

What is the longest lasting pool finish?

Tile Finishes Though tile is the most expensive pool finish and takes longer to install than plaster and aggregate, it’s the longest lasting pool surface. With proper application and minimal maintenance, tiles should never need to be replaced. Tile pool finishes come in ceramic, porcelain, glass and stone.

How much does it cost to resurface a pool with quartz?

The average cost for polished and rough aggregate pool resurfacing, including quartz, pebble, and crushed stone, is $6,500, including labor. Aggregates have a long life span, with quartz lasting around 12 years and glass beads lasting more than 20 years.

What is the difference between Marcite and Gunite?

A gunite pool’s biggest pro is having the most durable finish of any swimming pool surface. … While Marcite plaster is the least expensive of the gunite pool surfaces, it does have its disadvantages. The surface can start to show visible chipping or etching after 5 to 7 years.

How much does it cost to renovate a concrete pool?

Concrete Pool ProjectAverage Cost RangeRemodel Concrete Pool$10,000 – $60,000 and upRemove Concrete Pool$5,000 – $15,000Fill in Concrete Pool$3,500 – $5,000Replace Concrete Pool with Fiberglass Pool$55,000 – $95,000 and up

How much does it cost to resurface a concrete pool deck?

Resurfacing also adds strength to your surface by covering and bonding any cracks in your deck. With resurfacing costs starting around $3 to $5 per sq. ft., placing an overlay on your pool deck could save you money and time.

Can you resurface an old pool?

Fortunately, it’s possible to rejuvenate a pool. A new lining might be the simple solution for an aboveground pool that’s lost its luster. If you want to perk up a tired fiberglass or concrete in-ground pool, consider resurfacing.

Does pool plaster darken as cure?

These colored plasters may also be discolored (white streaking or spotting) from the addition of water to the surface or to trowels applied to the surface during finishing. These discolorations are permanent.