For instance, the DW745 is lighter, cheaper, and a little better in terms of the overall warranty. The DWE7480 is more powerful and offers a greater rip capacity for larger workpieces. Both models are popular among their respective users.
- 1 Is the DeWalt DW745 discontinued?
- 2 What replaced the DW745?
- 3 What replaced the DWE7480?
- 4 What is the difference between DWE7480 and DWE7485?
- 5 Why is DeWalt out of stock?
- 6 Why is dwe7480 discontinued?
- 7 Can I use a dado blade on DWE7485?
- 8 What saw blade comes with DWE7480?
- 9 What is Rip capacity?
- 10 Can you use a 8 blade on a 10 table saw?
- 11 What is dado saw blade?
- 12 What is Arbor size on a table saw?
- 13 How thick can a 10 table saw cut?
- 14 How deep can a 8 1 4 table saw cut?
- 15 Is Dewalt phasing out 18V?
- 16 Which is the best cordless drill?
- 17 Is Dewalt American?
- 18 Can you use a dado stack on DeWALT table saw?
- 19 Can you put a dado blade on a Dewalt miter saw?
- 20 Can I use a smaller blade on my table saw?
- 21 How tall is DWE7491RS?
- 22 How many HP is DWE7491RS?
- 23 What is Arbor size on a miter saw?
- 24 What is left and right rip capacity?
- 25 What does 20 inch rip capacity mean?
- 26 How big of a rip fence do I need?
- 27 Can a circular saw blade be used on a Mitre saw?
- 28 Can I use a 7 inch blade in a 10 inch table saw?
- 29 Can I use a bigger blade on my circular saw?
Is the DeWalt DW745 discontinued?
SpecificationDewalt DW745DeWalt DWE7480Voltage120V120VMotor Current Rating15 A15 A
What replaced the DW745?
The DWE7485 is the newest model and can be seen as a replacement of the DW745, which although still for sale, seems to be slowly phased out as well. It has about the same size as the DW745, but doesn’t sport a full 10-inch blade anymore, and looks visually more like a small version of the DWE7491.
What replaced the DWE7480?Amazon says that the DWE7480 is discontinued and that the DWE7485 is “a newer model of this item.” Although Amazon doesn’t have it in stock yet, Home depot has quite a few of the new saws in stock at local stores.
What is the difference between DWE7480 and DWE7485?
Both saws can bevel the blade up to 45°. The DWE7480 is able to cut up to 3 1/8” deep at an angle of 90° and can cut up to 2 1/4” at a 45° angle. The DWE7485 will cut up to 2 9/16” deep at 90° and is able to cut up to 1 3/4” at an angle of 45°.
Why is DeWalt out of stock?
Probably a result of manufacturing and distribution challenges due to the current pandemic. I don’t think they would limit supply just to protect prices. All sorts of things have been in short supply at one time or another. For example, earlier last year you couldn’t get plaster for love nor money!
Why is dwe7480 discontinued?
10 inch saws in this format are being discontinued due to regulatory requirements. All the new portable table saws are 8 inch.
Can I use a dado blade on DWE7485?Despite the smaller saw blade, the DWE7485 weighs 10 lbs. … Like the other DeWALT job site saws, you cannot add a dado stack. This isn’t exclusive to this model, but that’s a deal breaker to a lot of woodworkers.
What saw blade comes with DWE7480?
Model Number:DWE7480Dust Port Diameter:Warranty:3 Year Limited WarrantyMax Rip to Left of Blade:Cutting Diameter:10″Max Rip to Right of Blade:Blade Type:24T CarbideTool Dimensions:Arbor Size:5/8″Tool Weight:Does Dewalt table saw come with blade?
DEWALT DW745 10-Inch Compact Job-Site Table Saw. … This saw comes with blade guards, a miter gauge, a push stick, and a dependable 10-inch, 24-tooth carbide blade to get your project started right away.Article first time published on askingthelot.com/what-is-the-difference-between-dwe7480-and-dw745/
What is Rip capacity?
Rip capacity is basically defined as the amount of space between the edge of the table saw’s blade and the edge of the fence.
Can you use a 8 blade on a 10 table saw?
As long as the diameter of the arbor hole on the stacked dado blade set matches the arbor diameter of your table saw or radial-arm saw—and the arbor is long enough for a dado blade—you can use an 8-inch dado blade on a 10-inch table saw.
What is dado saw blade?
A dado blade is a circular saw blade that cuts grooves into the wood that are much wider than traditional saw blade cuts. They are used for interlocking applications. … You can use other methods to achieve the wide groove cut without a dado blade, including using a clamp guide with a handheld router or miter saws.
What is Arbor size on a table saw?
The arbor is the shaft that holds the blade. On all American stationary saws that use a 10″ blade, the arbor is 5/8″ in diameter where the blade is attached.
How thick can a 10 table saw cut?
Cutting Depth and Blade Size With a 10-inch table saw, you can make a maximum cut up to 3.5-inches deep, and with a 12-inch table saw, you can cut up to 4-inches deep.
How deep can a 8 1 4 table saw cut?
Cut Capacity: Depth of cut at 45: 1-5/8 In. Cut Capacity: Depth of cut at 90: 2.2 In.
Is Dewalt phasing out 18V?
It’s official – Dewalt announced today that their 18V NiCad cordless power tool system will be discontinued, and they expect for remaining NiCad batteries to be phased out by March 2022.
Which is the best cordless drill?
- Dewalt 18V XR Brushless Compact Lithium-Ion Combi Drill. …
- Bosch PSR 18 LI-2 Ergonomic. …
- Worx WX372. …
- Ryobi 18V RID1801M ONE+ …
- Bosch PSB 1800 LI-2. …
- Makita DHP484RTJ 18 V Li-ion LXT Brushless Combi Drill. …
- DeWalt DCK211D2T 10.8V Compact Drill Driver and Impact Driver.
Is Dewalt American?
DEWALT was founded in America and is still based in America. Each of our 7 US manufacturing facilities produces some of our most popular tools, including grinders, drills, impact drivers, and reciprocating saws.
Can you use a dado stack on DeWALT table saw?
As you can see on DeWALT’s FAQ section for the model itself, they state that “No similar to our other compact table saws (DWE7485 and DW745) the unit does not accept DADO stacks.” This is also addressed in the Instruction Manual supplied with the table saw, on page 15 under “Saw Blades,” adding that personal injury may …
Can you put a dado blade on a Dewalt miter saw?
Not everyone knows this, but you can make dadoes on your miter saw. Yep, on your miter saw. No need to put a dado head on your table saw, or set up a router bit in a hand-held router or on a router table. If your miter saw has the right flip down stop, you can use it to make dadoes.
Can I use a smaller blade on my table saw?
Most table saws use 10″ blades, but some take smaller blades, and some take larger. Though not generally recommended, you can use a smaller blade than your saw is designed to handle (with the obvious loss in depth of cut). Never try to use a larger blade.
How tall is DWE7491RS?
The DWE7491RS measures approximately 48″ in height, 28″ in width, and 22″ in depth when folded with the stand attached.
How many HP is DWE7491RS?
Dewalt DWE7491RS Table Saw, 120 V, 15 A, 2 hp, 10″ Blade, 4800 rpm.
What is Arbor size on a miter saw?
The arbor size is standard for each standard size miter saw. For 8-inch and 10-inch miter saws, the standard arbor size is 5/8 inch. Miter saws that are 12 inches require a 1-inch arbor. Retail miter saws are sold with an arbor and bevel.
What is left and right rip capacity?
Band saws: … The ripping capacity of a table saw is determined by the distance from the saw blade to the maximum distance the fence can travel to the right side of the saw blade. Common distances are 28, 30, and 50 inches. Left tilt table saws versus right tilt table saws.
What does 20 inch rip capacity mean?
It means that you can rip up to a 20″ board or piece of plywood.
How big of a rip fence do I need?
Set your rip fence about 1 ⁄ 2 ” wider than the desired dimension of your workpiece. After ripping one edge, flip the workpiece over, reposition your rip fence to the desired width, and rip the opposite edge of the board.
Can a circular saw blade be used on a Mitre saw?
Best Circular Saw Blades for Your Project. Circular saw blades are designed for use with miter saws, table saws, radial arm saws, cut-off saws and standard circular saws. Many circular blades can be used interchangeably between devices. … Safety: Always wear eye and hand protection when using circular saws.
Can I use a 7 inch blade in a 10 inch table saw?
4 Answers. I use 7.25″ and 8″ blades on a 10″ table saw all the time, with no problem. You will have less depth of cut, of course, and also a reduction of rim speed,which will slightly increase chances of tearout, and slightly reduce risk of burning, both to a negligible degree under most conditions. Go for it.
Can I use a bigger blade on my circular saw?
Can I use larger blades? Short answer: No. Long answer: You should only ever use larger circular saw blades, when the difference is fairly negligible (1 mm / 1/16″). The reason for that is that for safety reasons most saws are built to tight tolerances.